Apply the Thermal Paste Above the CPU and GPU. I personally prefer the middle dot method and that is what Im going to recommend.

How To Apply Thermal Paste On Processor Cpu Amd Or Intel Techy Trez How To Apply Thermal Processor

Take the type of cooler into account too.

How to apply thermal paste. Apply a tiny amount of thermal paste to the center of the cooler base on the heat sink. There are four ways you can apply thermal paste the surface spread method middle dot method horizontal line method and vertical line method. Attach the heat sink to the processor then reconnect the CPU fan wire to the motherboard.

If you already have thermal paste pre-applied on your cooler you can skip this step You only need to apply a small amount roughly the size of a grain of rice or a pea onto the center of the integrated heat spreader. Apply New Thermal Paste. There are different ways to apply new thermal paste to the processor.

To apply thermal paste we recommend using the method proposed by your processor manufacturer. Some even dab a thick x-mark or happy face right in the middle of the CPU. If you want to apply thermal paste to help your computer stay cool wipe the surface of your CPU and your heat sink with a cotton ball dampened with isopropyl alcohol.

Check them out on Newegg h. Apply a thin line of thermal paste directly down the center of the IHS Integrated Heat Spreader and then allow the pressure of the CPU cooler to spread the paste as you secure it. You can also use TIM cleaner to clean any remaining residue for that apply few drops of TIM cleaner and then gently rub it in a circular motion on the processor.

You draw a straight line from one corner to the other. After that remove the CPU cooler from the processor and gently clean the thermal paste with a paper towel. This method is ideal for standard size CPUs as the pea will easily spread to cover the entire CPU without much or any spillage.

To apply new thermal paste use the application method recommended for your specific processor type vertical line horizontal line middle dot or surface spread. Then wipe it clean with a lint-free cloth. Apply thermal paste onto the center of the CPUs IHS.

You can lead it in a blob spread it out across the IHS draw it out in a line shape or in an X shape. Wrap the tip of your index finger with a piece of plastic such as a sandwich bag or Saran wrap. The most commonly advised method to apply thermal paste is the pea method.

Will your thermal paste application method impact your CPU temperaturesCrunchyroll link. An aftermarket heat sink with a back plate which is screwed down can tolerate less paste than AMDs hook a clip and flip a lever or Intels four. Then repeat the process and connect the other two corners with the two lines intersecting in the middle roughly in the right angle.

You can spread it use a brush to apply it or wear latex gloves and your index finger to spread the paste. For applying thermal paste first you need to replace the old thermal paste. If youre using the surface spread method.

If you make sure to apply even pressure to the CPU cooler the paste should spread evenly and effectively. Place a very small drop of the thermal paste no larger than a grain of rice onto the surface of the central processing unit and graphics processing unit. In the pea method you apply a single dot of thermal paste around the size of a pea to the centre of the CPU then attach the CPU cooler.

Tongs buy a good pair of tongs to put the CPU into the socket with if the top of the CPU is covered with paste getting it into the socket and pressing it down firmly normally ends up with you getting paste everywhere and all down the sides of the CPU and onto the pins and over the PCB so use tongs. The cross method is also a reliable method of applying thermal paste to your CPU or GPU. Add Tip Ask Question Comment Download.

How to Apply Thermal Paste to a CPU SUBSCRIBE for more. Overall a good measurement is to apply a pea-sized blob of thermal paste or a bit bigger to the IHS. Just apply a drop or two to the old material and let it sit for a minute while the cleaner breaks up the grease in the thermal paste.